EN
Get In Touch
YADA provides FPsO piping system products andsolutions in a wide range of materials, and hasachieved the first domestic production and delivery oflarge-diameter, ultra-thick, ultra-high-pressure duplexsteel products.
Leveraging its in-house developed 4,000-ton bendingmachine and the world's first 25,000-ton flexibleintegrated hydraulic cold-forming press, YADA offersindustry-leading service capabilities for high-pressureand high-specification products.
Duplex Steel Ultra-thick Ultra-high Pressure Series Products
| Product Parameters | |
|---|---|
| Production Range | 1/2"-100" (DN15-DN2500) |
| Wall Thickness | Sch5-Sch160 (1.5mm-100mm) |
| Material |
Austenitic Stainless Steel:
304L, 316L, etc. Duplex Stainless Steel:S31803. S32205.S32750,S32760,etc. Nickel-Based Alloy:N06625,N08825,etc. |
Stena (Sweden) & FPG
49,000 DWT Chemical Tanker
Hengyi
49,600 DWT Chemical Tanker
IMC
55,000 DWT Newbuilding Project
Odfjell (Norway)
38,000 DWT Duplex Stainless Steel Chemical Tanker
Horizon Tankers
50,000 DWT MR-Type Chemical Tanker
Stolt-Nielsen
38,000 DWT Chemical TankerThe core mission of the Produced Water Treatment Skid is to treat oily wastewater separated during petroleum extraction, purifying it to reduce oil content to levels permitted by environmental regulations (typically required to be below 29 mg/L) before dischargeinto the sea or reinjection.
Oil content in treated water can be reduced to as low as 5mg/L.
Compact footprint with high space utilization.
Complete process from oil-water separation to watertreatment within 30 minutes.
Precisely adaptable to upstream (oil-gas separation) and downstream (reinjection/discharge) interfacesand operating conditions.
Capable of handling flow fluctuations up to 50%, demon-strating strong adaptability to varying offshore oilfieldproduction rates.
User-friendly layout of valves, instruments, and pumpsfor easy maintenance; supports remote monitoring and diagnostics.
CIS are critical infrastructure for maintaining the safety of oil and gas flow and ensuring long-term reliable operation of equipment. The primary purpose is to address complex challenges encountered in deep-sea extraction-such as scaling, corrosion, andemulsification-by injecting chemicals into seawater to assist in deoxygenation, desulfurization, and other treatment processes.
Reduces footprint by over 50% and minimizes weight.
Integrates all functions including storage, metering, injection, control, and safety protection.
Factory prefabrication combined with on-site assembly shortens offshore installation time from 8 weeks to just 2 weeks.
Critical components (e.g., pump sets) utilize dual-diaphragm technology and 100% redundancy configurationto ensure continuous, uninterrupted operation.
Meets APl, ATEX/IECEx, NORSOK, IMO, and other international standards.
Equipped with high-precision metering pumps achieving accuracy up to ±1%, featuring intelligent closed-loop control.
Allows flexible addition of new chemical injection functions through reserved interfaces and control margins. Supports loT remote monitoring and predictive maintenance.
Stena (Sweden) & FPG
49,000 DWT Chemical Tanker
Hengyi
49,600 DWT Chemical Tanker
IMC
55,000 DWT Newbuilding Project
Odfjell (Norway)
38,000 DWT Duplex Stainless Steel Chemical Tanker
Horizon Tankers
50,000 DWT MR-Type Chemical Tanker
Stolt-Nielsen
38,000 DWT Chemical TankerBy defining "Making core" with full chain manufacturing and precision quality,"Service core" as facing the world and providing sincere services, and "Professional core" refers to green development under professional driven, YADA contributes professional strength to promote the low-carbon and green development of global shipbuilding,marine engineering, petrochemical industries and ensures stable pipeline operation for global customers.
